Iveco ML90E18 Rigid 4 x 2 vehicle (choice of left or right-hand drive) rated at 7,500kgs to manufacturer’s standard specifications and to include 7.0m body to our Drawing 2745.C.01 with the following specification:
- Fiberglass fairing to blend cab to body.
- Exterior colour is white.
- 2 High-level double glazed windows to offside.
- 2 Side entrance doors with hinged steps to nearside.
- Roof mounted air conditioning unit (for main laboratory and additional area).
- Unit wired for: 230volt single phase electrics with 3 x bulkhead lights, 6 x double 13-amp sockets mains consumer unit with RCD protection and exterior input socket rated at 32amp with 20m land line. 6.5kw diesel generator built in to exterior locker with acoustic and fireproof lining. 3 x 12v LED lights.
- 2 Heavy Duty Batteries with 1kw inverter providing 230volt supply via 5 Red Double Power Sockets.
- Exterior access fire proof locker for client fuel / waste cans.
- Worktops and cupboards as per plan layout 2745.C.01 and to include high level cupboards to partition wall for additional storage.
- Sink with hot and cold taps. (Hot water is an optional extra).
- Walls lined in GRP, ceiling in white CSM 10 plywood and anti slip vinyl floor covering.
- Fire detection system / alarms in laboratory and vehicle cab.
- Three Foam fire extinguishers (one in each area and vehicle) plus additional CO2 unit in laboratory area.
- Optional ducted warm air heating system to laboratory and office / sleeper area.
- Optional hot water system.
- Front partitioned area can be fitted either as an office / additional lab area with full width desktop and high level cupboards over, or as a separate sleeping area, including bunk bed, wardrobe, sink and vanity unit with hot and cold taps, plus hinged table.
Price on application.
- Recirculating fume cupboard with wall spur power outlet.
- Swivel operator chair bolted to floor including seat belt.
- 12v / 230v fridge (60 litre) with battery charger.
- Body graphics.
- Additional vehicle fuel tank (nominally 112 Ltrs)